Air return style: Full down draft, basement high approx. 300mm Front door structure: approx. 3 folded without frame Safe door: 1 piece in the side wall, min. 2000X800mm Wall panel meterial: EPS ( Expanded polystyrene) approx. 50mm, wall panel side with metal covered, Steel thickness(mm): approx. 0.426 Top light: approx. 8X4X36W, Side light: approx. 8X2X36W (Vertical) Intake fan (KW): approx. 2X3.5KW Exhaust fan (KW): approx. 1X7.5KW Total power (KW): Max. 18.5KW Generator frame:Iron frame with aluminum angle Heat exchanger: stainless steel made, rear duct Buner, Exhaust duct: 4M straight ducts, 2pcs of elbows filter installed:hingle installed, mounted above support frame Fan capacity(M3/H): approx. 24000 Max drying temperature: 80℃ Motor Voltage: 380V/50HZ/3PH Manual Book